- Install the TURBO as follows:RECOMMNEDED TOOLS:• Gloves and safety glasses• Applicable gaskets, bolts, clamps, and fittings• Plier, wrench, ratchet and socket, and screwdriver sets• Engine oil• Engine oil lines, if necessary• Oil filter, and air filter• High temperature anti-seize compound*Do not use liquid gasket, sealant, exhaust gum or air/power tools while installing theturbo. Use a high temperature anti-seize compound on all threaded fasteners connectedto the turbo. Driver & Passenger For Ford F150 F-150 3.5L 2011-2012 EcoBoost K03 Twin Turbo -
Install the TURBO as follows:
RECOMMNEDED TOOLS:
• Gloves and safety glasses
• Applicable gaskets, bolts, clamps, and fittings
• Plier, wrench, ratchet and socket, and screwdriver sets
• Engine oil
• Engine oil lines, if necessary
• Oil filter, and air filter
• High temperature anti-seize compound
*Do not use liquid gasket, sealant, exhaust gum or air/power tools while installing the
turbo. Use a high temperature anti-seize compound on all threaded fasteners connected
to the turbo.
BEFORE REMOVING THE TURBO
1. Assess system to determine why the original turbo failed and if additional
replacement parts are needed. For example: leaking intercooler, damaged intake
or return lines, faulty exhaust gas recirculation (EGR) valve, clogged air filter, etc.
Note: If the turbo failed because the turbine/compressor wheel seized, often due
to contaminants/foreign objects, the intercooler should also be replaced.
2. Identify placement of bolts/studs, gaskets, and o-rings to match when installing
new turbo.
3. Fill the turbo oil inlet port to “overflowing” with clean engine oil prior to mounting
the oil feed line.
4. Assess oil levels and pressure to ensure system is leak proof.
INSTALLING THE NEW TURBO
Before installing turbo it is imperative that engine oil and filter is changed. Failure to do
so may void warranty.
1. Remove all protective caps and ensure turbo is clean and free of debris.
2. Ensure oil intake and return lines are clear and in good condition. In some cases,
the oil intake line may be damaged internally if too close to a heat source.
Because this is not always noticeably upon inspection, we recommends replacing
the intake line when replacing the turbo.
3. Before connecting the oil intake and return lines, start the engine without firing
until a steady stream of oil flows from the drain port.
4. Locate exhaust manifold and carefully position new gasket CENTERED on opening.
Failure to fit gasket opening exactly over exhaust manifold openings will affect
performance, often noticeable by a whistling noise or low engine power.
5. Mount turbo to exhaust on engine block and carefully torque studs/bolts to
specifications.
6. Allow the engine to idle for at least 3 minutes after installing the turbo to ensure
turbo system is properly lubricated. If the turbo is connected to engine coolant
lines, it is important to allow coolant to cycle through the turbo to prevent
damage from excessive heat.
Item SpecificsBrand egnetpartsManufacturer Part Number EG17833523507SType TurbochargerModel K03Warranty 1 YearPlacement on Vehicle FrontCustom Bundle YesFitment Type Direct ReplacementInterchange Part Number Part Number Part Number Contents As the picture showsModified Item NOOE Spec or Performance/Custom OE Spec
Payment
We only accept payment through PayPal.
Shipping All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.Returns 30 Days Free Return and Money BackIf you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.The full refund or replacement will be available for all faulty items, including the original shipping cost.The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.Contact Us We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Shop CategoryStore Home Window Motors & Regulators◈Driver Side◈Passenger Side◈Front Left & Right◈Rear Left & Right Body Kits◈Trunk Spoiler◈Roof Spoiler◈Truck Accessories◈Bumper Lips◈Universal◈Other Off-Road Parts▷CV Axle Assembly♢Left/Driver Side♢Right/Passenger Side♢Front Left & Right♢Rear Left & Right◈Rear Differential Assembly Drivetrain Parts◈Transfer Case Motor◈Transfer Case PTO Units◈Limited Slip Differential Turbos & Parts◈Turbo Cartridge CHRA◈Turbocharger◈Other OtherBest Sales New Turbo For Volvo Heavy Duty Trucks D12 D12D engine 3598947 3598946 HX52 USD 148.58 New Turbo For 2005-2015 Cummins ISX15 QSX15 Series Engine HE400VG HE451VE USD 741.58 New Turbo For Caterpillar Skid Steer 3024C 247 Series Skid ASV Track Loader 2.2L USD 132.58 New Turbo For 1986-2003 HOLSET Cummins 4BT 3.9 4TA-390 Engine Diesel H1C USD 137.58 New Turbo For 2016-2021 Chevy Camaro Equinox 2013-2021 Malibu 2.0L 2.0T TD04L6 USD 179.58 Newly Listed Fits Cadillac STS 2011-05 Pair Front Side Power Window Regulator & Motor USD 92.58 Trunk Spoiler For 2009-2012 Audi A4 B8 Sedan High Kick Painted Black ABS USD 61.58 Trunk Spoiler For 2015-2018 Hyundai Elantra AD pre-facelift Painted Black ABS USD 62.58 Trunk Spoiler For 2013-2017 Audi A7 S7 RS7 Real Carbon Fiber Glossy Finish USD 137.58 Universal 62-65" Gloss Black Car Front Bumper Lip Spoiler Splitter Body Kit 3PCS USD 47.58 Terms & ContactPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Driver & Passenger For Ford F150 F-150 3.5L 2011-2012 EcoBoost K03 Twin Turbo -
Install the TURBO as follows:
RECOMMNEDED TOOLS:
• Gloves and safety glasses
• Applicable gaskets, bolts, clamps, and fittings
• Plier, wrench, ratchet and socket, and screwdriver sets
• Engine oil
• Engine oil lines, if necessary
• Oil filter, and air filter
• High temperature anti-seize compound
*Do not use liquid gasket, sealant, exhaust gum or air/power tools while installing the
turbo. Use a high temperature anti-seize compound on all threaded fasteners connected
to the turbo.
BEFORE REMOVING THE TURBO
1. Assess system to determine why the original turbo failed and if additional
replacement parts are needed. For example: leaking intercooler, damaged intake
or return lines, faulty exhaust gas recirculation (EGR) valve, clogged air filter, etc.
Note: If the turbo failed because the turbine/compressor wheel seized, often due
to contaminants/foreign objects, the intercooler should also be replaced.
2. Identify placement of bolts/studs, gaskets, and o-rings to match when installing
new turbo.
3. Fill the turbo oil inlet port to “overflowing” with clean engine oil prior to mounting
the oil feed line.
4. Assess oil levels and pressure to ensure system is leak proof.
INSTALLING THE NEW TURBO
Before installing turbo it is imperative that engine oil and filter is changed. Failure to do
so may void warranty.
1. Remove all protective caps and ensure turbo is clean and free of debris.
2. Ensure oil intake and return lines are clear and in good condition. In some cases,
the oil intake line may be damaged internally if too close to a heat source.
Because this is not always noticeably upon inspection, we recommends replacing
the intake line when replacing the turbo.
3. Before connecting the oil intake and return lines, start the engine without firing
until a steady stream of oil flows from the drain port.
4. Locate exhaust manifold and carefully position new gasket CENTERED on opening.
Failure to fit gasket opening exactly over exhaust manifold openings will affect
performance, often noticeable by a whistling noise or low engine power.
5. Mount turbo to exhaust on engine block and carefully torque studs/bolts to
specifications.
6. Allow the engine to idle for at least 3 minutes after installing the turbo to ensure
turbo system is properly lubricated. If the turbo is connected to engine coolant
lines, it is important to allow coolant to cycle through the turbo to prevent
damage from excessive heat.
Item SpecificsBrand :egnetpartsManufacturer Part Number :EG17833523507SType :TurbochargerModel :K03Warranty :1 YearPlacement on Vehicle :FrontCustom Bundle :YesFitment Type :Direct ReplacementInterchange Part Number Part Number Part Number Contents :As the picture showsModified Item :NOOE Spec or Performance/Custom :OE Spec
PaymentShippingReturnsContact UsWarning
We only accept payment through PayPal.
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.We do not ship to P.O. Boxes, APO/FPO or Military Mail Box. 30 Days Free Return and Money BackIf you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.The full refund or replacement will be available for all faulty items, including the original shipping cost.The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses. We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
All rights reserved.
